JB/T 3411.49-1999 弓形夹 尺寸
作者:标准资料网 时间:2024-05-05 13:31:46 浏览:9619
来源:标准资料网
基本信息
标准名称: | 弓形夹 尺寸 |
英文名称: | Clamp - Dimensions |
中标分类: |
机械 >>
工艺装备 >>
手工工具 |
ICS分类: |
机械制造 >>
手持工具 >>
手动工具
|
替代情况: | JB 3459-1983 |
发布部门: | 机械科学研究院 |
发布日期: | 1999-05-20 |
实施日期: | 2000-01-01 |
首发日期: | 1900-01-01 |
作废日期: | 1900-01-01 |
归口单位: | 机械科学研究院 |
出版日期: | 1900-01-01 |
页数: | 1 页 |
批文号: | 国机管[1999]282号 |
适用范围
JB/T3411.49-1999 本标准是对 JB 3459-83《弓形夹 尺寸》的修订,修订时只作了以下几点修改,主要技术内容未改变: ——编写格式; ——标准名称加英文; ——螺纹的画法。 本标准规定了弓形夹的型式和尺寸。
前言
没有内容
目录
没有内容
引用标准
没有内容
所属分类: 机械 工艺装备 手工工具 机械制造 手持工具 手动工具
【英文标准名称】:Petroleumproducts-Corrosivenesstocopper-Copperstriptest
【原文标准名称】:石油产品对铜的腐蚀性铜片腐蚀试验
【标准号】:ISO2160-1998
【标准状态】:现行
【国别】:国际
【发布日期】:1998-09
【实施或试行日期】:
【发布单位】:国际标准化组织(IX-ISO)
【起草单位】:ISO/TC28
【标准类型】:()
【标准水平】:()
【中文主题词】:石油产品;铜;铜腐蚀试验;腐蚀试验;试验;试验
【英文主题词】:Automotivefuels;Aviationfuels;Copper;Coppercorrosiontests;Corrosion;Corrosiontests;Corrosiveness;Corrosivity;Definitions;Dieselfuels;Fueloil;Gasoil;Gasoline;Hydraulicoils;Kerosine;Lubricatingoils;Materialstesting;Mineralspirits;Naphthasolvents;Petroleumproducts;Testequipment;Testing
【摘要】:ThisInternationalStandardspecifiesamethodforthedeterminationofthecorrosivenesstocopperofliquidpetroleumproductsandcertainsolvents.Volatileproducts,havingamaximumvapourpressureof124kPaat37,8℃areincluded.Volatileproductswithavapourpressureabove124kPaat37,8℃shouldbetestedaccordingtoISO6251(seecautionbelow).ElectricalinsulatingoilsshouldbetestedaccordingtoISO5662.CAUTION—Someproducts,particularlynaturalgasolines,mayhaveasignificantlyhighervapourpressurethanischaracteristicfortheirclass,evenifbelow124kPaat37,8℃.Forthisreason,extremecautionshouldbeexercisedtoensurethatthepressurevesselcontainingsuchmaterialisnotplacedinabathat100℃.Suchsamplesmaydevelopsufficientpressureat100℃torupturethepressurevesselandcausedamageand/orinjury.
【中国标准分类号】:H25
【国际标准分类号】:75_080
【页数】:11P.;A4
【正文语种】:英语
Product Code:SAE J1521
Title:Truck Driver Shin-Knee Position for Clutch and Accelerator
Issuing Committee:Truck And Bus Human Factors Committee
Scope:This SAE Recommended Practice describes two-dimensional, 95th percentile truck driver, side view, seated shin-knee contours for both the accelerator operating leg and the clutch operating leg for horizontally adjustable seats (see Figure 1). There is one contour for the clutch shin-knee and one contour for the accelerator shin-knee. There are three locating equations for each curve to accommodate male-to-female ratios of 50:50, 75:25, and 90:10 to 95:5.